Parts Of The Printer - Genicom microLaser 210 User Giude

1-6 microLaser 210 User Guide

Parts of the Printer

Parts of the Printer

The following figures indicate the names and functions of the main parts of the printer.
Front Cover
Provides access to the inside of
the printer, allows you to replace
the toner cartridge or remove
jammed paper
Front Tray
Provides an alternate method of
feeding paper to the printer.
Accommodates various print
media including envelopes,
transparencies, and labels.
Tray Extension
Allows you to load
large paper sizes in
the front tray.
Power switch
Rear cover
Provides access to the rear of the
printer; allows you to remove
jammed paper or install the
duplexer.
Publication No. GEG-99054
Control panel
Provides access to all
controls required to
operate the printer.
Paper output tray
550-sheet Universal
Paper Tray
Holds paper from post-
card size to Legal size.
Figure 1-3: Front of the Printer.
Top cover
Provides access to the inside of the
printer; removing it allows you to
install the offset catch tray.
Power cord
connector
Figure 1-4: Rear of the Printer.
Genicom
Paper exit slot
Paper amount indicator
Indicates the approximate
remaining amount of paper.
Ventilation slot
Releases hot air produced
inside the printer to prevent
overheating.
Mar 00