Table of Contents
Advertisement
7-6
microLaser 210 User Guide
Installing the 550 Sheet Paper Feeders
10.
Insert the feeder paper tray and the main paper tray all the way into the paper feeder, making
sure each is properly seated inside the printer.
11.
Insert the plug of the power cord into the AC outlet, and turn the printer on by pressing
[ I ] on the power switch on the left front of the printer.
NOTE:
If an error message appears on the control panel display, see Chapter 5: Troubleshooting.
Installing Two Paper Feeders
Use the following procedure to install two paper feeders:
1.
Remove the paper feeders from their packaging and remove any packing tape or cardboard
inserts. Set aside the small plastic bags, each containing three thumbscrews.
Publication No. GEG-99054
Genicom
Mar 00
Advertisement
Table of Contents
