Table of Contents
Advertisement
8-2
microLaser 210 User Guide
About the Envelope Feeder
About this Chapter
This chapter provides all of the information necessary to install, use, and maintain the envelope
feeder, including procedures for removing paper jams.
About the Envelope Feeder
The Envelope Feeder is an optional single-tray feeder that attaches to the front of the printer. The
tray holds 50 to 100 envelopes or postcards, depending on the type of media.
Installing the Envelope Feeder
Before installing the envelope feeder, verify that you have received the following items in the ship-
ping box:
Installing the Envelope Feeder
Use the following procedure to install the envelope feeder:
WARNING: Before installing any options, turn the printer off by pressing [ O ] on the power
switch on the right side of the unit and disconnect the power cord from the AC outlet.
These precautions are necessary to avoid the risk of electric shock.
1.
Turn the printer off by pressing [ O ] on the power switch on the right side of the unit, and
disconnect the power cord from the AC outlet.
Publication No. GEG-99054
1
2
3
4
5
4
3
1
2
1
3
2
6
7
8
9
10
11
12
13
GEG-99042
Installation Sheet
Genicom
Envelope Feeder
Mar 00
Advertisement
Table of Contents
