Print Media Weight, Type, And Size; Loading The Universal Paper Tray - Genicom microLaser 210 User Giude

Print Media Weight, Type, and Size

The following table defines print media that you can use in each of the paper sources, and also indi-
cates the feed orientation—long edge feed (LEF) or short edge feed (SEF). If you have concerns
about a specific brand or type of media, try samples of the media to determine if the resulting
printer performance and print quality meet your expectations.

Loading the Universal Paper Tray

The 550-sheet universal paper tray has two width guides that are located on the sides of the tray,
and one length guide that is located near the center of the tray. These guides allow you to adjust the
size of the area that holds paper.
NOTE: The following procedure shows you how to load paper into the main paper tray. To load paper
into the optional 550 sheet paper feeder, simply complete the procedure using the 550 sheet
paper tray and feeder rather than the main paper tray.
Mar 00
Paper Source Meter Weight
Universal Paper Tray 60 to 216g/m
(main tray and optional
550 sheet paper
feeder)
Do not use label stock
or other special media
in the 550 sheet paper
tray.
Front Tray 60 to 216g/m

Loading the Universal Paper Tray

Paper Type and
Feed Direction
2
Any paper
A4 SEF
Letter SEF
Legal 13 inch
Legal 14 inch
Executive SEF
A5 SEF
B5 SEF
2
Envelopes
Transparencies
Labels
Postcards
Standard Paper (LEF
and SEF)
Other Paper
Genicom
microLaser 210 User Guide 2-11
Paper Sizes
Accommodated
Width:
98.4mm to 215.9mm
3.87 to 8.5 inches
Length:
148.5mm to 355.6mm
5.85 to 14 inches
297 x 210mm
11.7 x 8.27 inches
279.4 x 215.9mm
11 x 8.5 inches
330.2 x 215.9mm
13 x 8.5 inches
355.6 x 215.9mm
14 x 8.5 inches
266.7 x 184.5mm
10.5 x 7.2 inches
210 x 149mm
8.27 x 5.9 inches
257 x 182mm
10.12 x 7.17 inches
Width:
3.0 to 8.5 inches
76.2mm to 215.9mm
Length:
5.0 to 14 inches
127mm to 355.6mm
Publication No. GEG-99054