Table of Contents
Advertisement
2
Add Paper to Paper Tray LCC - C-404N (optional)
Add paper to paper tray LCC.
The paper size in this paper tray is set to A3 by default. If you want to
change the paper size for this paper tray, contact your technical
representative.
1
Open the top cover of the tray.
2
Press the button to lower the
paper-lifting plate to lower the plate
slightly.
3
Fan the new paper. Align the paper
edges straight.
4
Load the paper so that the side that
undulates upward is face down.
H
up to 4,000 sheets (80 g/m²)
5
Repeat steps 2 to 4 until the tray is
full.
6
Make sure not to exceed the
maximum paper filling level. The
paper stack must not be higher than
the red mark of the indicator.
7
Close the top cover
of the paper tray.
2-50
Getting to Know Your System
Di5510/Di7210
Advertisement
Table of Contents
