4
Procedure
1
In the basic options press the [Special Original] key.
The screen for selecting scan settings appears.
2
Press the [Mixed Original] key.
The background of the key becomes dark.
3
Confirm your selection by pressing [OK].
The basic options are displayed again. The background of the [Special
Original] key becomes dark. The "APS" feature has been
automatically enabled.
4
Change any other necessary system settings.
5
Use the 10-Key Pad to set the number of copies.
6
Align the originals against the left
back edge of the EDH. Then adjust
the original guides.
7
Press the [Start] key on the control
panel to start the copy job.
Position Mixed Original?
The originals must be positioned properly so they can be fed in without
difficulty. For more information, see page 3-12.
4-82
Basic Functions
Di5510/Di7210