Chapter 2 Preparations before using the copier
Adding Paper
This section describes how to load paper in the main body tray or
option tray and shows how to insert paper in the manual feed bypass
tray.
Add Paper Indication
When copy paper is depleted, the remaining copy quantity displays
in the Print quantity/Magnification ratio window for 90 seconds, and
the Main Body Tray Selection lamp or Option Tray Selection lamp
blinks.
After 90 seconds, the copier returns to the normal condition.
Main body tray selection lamp
SELECT PAPER
Option tray selection lamp
To replenish the tray with copy paper, use the procedure starting on
the following page.
NOTE:
Never pull out a tray to replenish it with paper while copying is in
process. Otherwise the copier will malfunction.
2-12
Print quaitity/Magnification ratio window
5
Lighter Normal Da
0
CALL
STOP/CLEAR
START PRINT