11) Set Auto Tray Selection - Konica Minolta Di5510 Advanced Information

7
7.12

(11) Set Auto Tray Selection

Set the paper trays and the paper tray sequence for automatic tray
switching (ATS) and automatic paper selection (APS).
1
Call up key operator mode.
The key operator mode menu is displayed.
2
Press the down arrow key on the lower edge of the touch screen.
The second page of the key operator mode menu is displayed.
3
In the key operator mode menu press the [11]
The screen for setting the paper tray priorities appears.
4
Select a tray from the left side of the touch screen. Then use the [OFF]
or [ON] button to specify whether the tray should be used when the
ATS/APS function is enabled.
Trays that are specified for use with the ATS/APS function are
displayed on the right side of the touch screen.
5
Use the [Up] and [Down] arrow keys on the touch screen to sort the
trays according to the desired access priority.
6
Confirm your input by pressing [OK].
The key operator mode menu is displayed again.
7-48
Settings in Key Operator Mode
Tray size setting
Di5510/Di7210
key.