Table of Contents
Advertisement
4
Procedure
1
In the basic options press the [Special Original] key.
The screen for selecting scan settings appears.
2
Press the [Z-Folded Original] key.
The key is displayed with a dark background.
3
Confirm your selection by pressing [OK].
The basic options are displayed again. The background of the [Special
Original] key becomes dark.
4
Configure the system settings for your job.
5
Use the 10-Key Pad to set the number of copies.
6
Load the originals
H
into the EDH.
7
Align the originals against the left
back edge of the EDH. Then adjust
the original guides.
8
Press the [Start] key on the control
panel to start the copy job.
4-84
Basic Functions
Di5510/Di7210
Advertisement
Table of Contents
