Table of Contents
Advertisement
4
Procedure
1
In the basic options press the [Output Menu] key.
The output menu is displayed.
2
Press the [Main Tray] key.
The background of the key becomes dark.
3
Press the [Punch] key.
The selection window for the hole position appears.
4
Select a punch mode. Confirm your selection by pressing [OK].
The output options are displayed again.
5
Confirm your settings by pressing [OK].
The basic options are displayed again.
6
Configure the system settings for your job.
7
Use the 10-Key Pad to set the number of copies.
4-24
Basic Functions
Di5510/Di7210
Advertisement
Table of Contents
