Table of Contents
Advertisement
5
Note the following important information!
Setting width/height
• Original tray:
• Defined area:
These features cannot be combined:
• Basic functions:
• Special originals:
• Applications:
Auto Detection
• Original tray:
• Maximum scanning
area:
These features cannot be combined:
• Basic functions:
• Special originals:
• Applications:
Image Repeat
• Original tray:
• Maximum scanning
area:
These features cannot be combined:
• Basic functions:
• Special originals:
• Applications:
5-36
on the original glass only
(reference point is the upper left corner of the original glass)
10 to 150 mm (in 1 mm increments)
EDH, 2-2, 2-1, APS, AMS, Rotation, Group,
Rotation Sort, Rotation Group
Mixed Original, Z-Folded Original
Sheet / Cover Insertion, Chapter, Combination, Booklet, OHP
Interleave, Image Insert, Dual Page, Non-Image Area Erase,
Reverse Image, Frame/Fold Erasure, Auto Layout, Image Shift,
Stamp/Overlay
Original glass
(reference point is the upper left corner of the original glass)
A3 to 10 × 10 mm
EDH, 2-2, 2-1, APS, AMS,
Rotation, Group
Rotation Sort, Rotation Group
Mixed Original, Z-Folded Original
Sheet / Cover Insertion, Chapter, Combination, Booklet, OHP
Interleave, Image Insert, Dual Page, Non-Image Area Erase,
Reverse Image, Frame/Fold Erasure, Auto Layout, Image Shift,
Full-Image Area, Stamp/Overlay
EDH, original glass
A3 to 10 × 10 mm
APS, AMS, Rotation (if zoom ratio is not 1,000), Group,
Rotation Sort, Rotation Group
Mixed Original, Z-Folded Original
Sheet / Cover Insertion, Chapter, Combination, Booklet, OHP
Interleave, Image Insert, Dual Page, Non-Image Area Erase,
Reverse Image, Frame/Fold Erasure, Auto Layout, Image Shift,
Overlay, Overlay Memory
Applications
Di5510/Di7210
Advertisement
Table of Contents
