Replenishing The Staple Supply; Finisher Fn-121/Fn-10 - Konica Minolta Di5510 Advanced Information

Getting to Know Your System
2.12

Replenishing the staple supply

(only with Finisher FN-121/FN-10 – optional)
If the staple magazine runs out, a message is displayed on the touch
screen. Use only staples that are suitable for this system. If you have
questions, please contact your technical representative.

Finisher FN-121/FN-10

This finisher has one staple unit.
1
Open the finisher door.
2
Carefully remove the stacker unit.
Di5510/Di7210
2
2-57