Table of Contents
Advertisement
8
Symptom
The copy has spots.
The copy has a dark
edge.
The copy is not
straight.
8-2
Possible Cause
The original glass is dirty.
The original cover is dirty.
The original is very thin or
transparent.
The original is printed on two
sides.
The exposure level has been set
too dark.
The original cover is dirty.
The original is incorrectly
positioned.
The paper size is larger than the
original size.
The lens mode selected does
not match the selected paper
size.
The original is incorrectly
positioned.
The original is not suitable for
the EDH.
Troubleshooting
Action
Clean the original glass.
See page 3-8.
Clean the original cover.
See page 3-8.
Place a sheet of white paper on
top of the original.
Manually brighten the exposure
of the copy. See page 4-49.
Manually brighten the exposure
of the copy. See page 4-49.
Clean the original cover.
See page 3-8.
Place the original correctly on
the original glass. See page 3-8.
Use paper of the same size as
the original.
Select a suitable lens mode. See
page 4-54.
Place the original correctly on
the original glass. See page 3-8.
Position the original correctly in
the original feed. See page 3-10.
Place the original on the original
glass.
See page 3-8.
Di5510/Di7210
Advertisement
Table of Contents
