Using Paper Not Specified To Any Tray: Paper Setting - Konica Minolta bizhub pro C6501 User Manual

9
9.6.3

Using Paper Not Specified to Any Tray: Paper Setting

Each paper tray has been preset with paper size and other specifications.
If you want to use another paper than any loaded in the trays, follow the pro-
cedure below to temporarily change the setting of the tray to be used.
When starting a job after a setting change has been made in paper type (e.g.
from Normal to Coated-GL), it may take a certain period of time before cop-
ying operation becomes available due to the fixing temperature adjustment.
Procedure
1
On the Copy Screen, check the tray setting for each tray.
– Each key displays paper size, weight, type/name, and paper
amount remaining in the tray.
The paper name will be displayed only when the same paper size
as that in registered specifications is loaded.
2
Load copy paper into the tray with the setting change made.
– The changed setting will not be cleared when copying job is com-
pleted using that tray.
3
Touch [Paper Setting].
– The same setting is available from the [Paper Setting] keys on both
Copy Screen and Machine Status Screen.
The Paper Setting Screen will be displayed.
9-44
Basic Job Settings
bizhub PRO C6501