7
(3) State of HDD Capacity
Check the actual capacity of the hard drive.
1
Call up key operator mode.
The key operator mode menu is displayed.
2
Press the down arrow key on the lower edge of the touch screen.
The second page of the key operator mode menu is displayed.
3
In the key operator mode menu press the [18]
setting
A submenu appears.
4
In the submenu press the [3]
The current hard disk capacity is displayed.
5
Press the [Return] key.
The submenu appears again.
6
Press the [Return] key.
The key operator mode menu is displayed again.
7-66
key.
Settings in Key Operator Mode
Hard disk assignment
State of HDD capacity
key.
Di5510/Di7210