Stop Navigating To A Waypoint; Waypoint Setup - Standard Horizon HX851 Owner's Manual

12.7 STOP NAVIGATING TO A WAYPOINT

To stop navigating to a waypoint, the radio must be switched to Normal Mode
with the following procedure.
1. Press and hold down the
Menu" appears.
Menu Menu Menu Menu
2. Press the
3. Press the
/ key.
4. Press the
"Navigation Navigation" or "Compass
Navigation Navigation
Navigation
and press the

12.8 WAYPOINT SETUP

12.8.1 DISTANCE UNIT
Allows Waypoint display to be shown in "Nautical Mile", "Statue Mile"or "Kilo-
Meter" for distance.
1. Press and hold down the
Menu" appears.
Menu Menu Menu Menu
2. Press the
Setup" Setup". Setup"
Setup" Setup"
3. Press the
/ key.
4. Press the
5. Press the
able selections are NM (Nautical Mile), SM (Mile) or
KM (Kilo-Meter) for distance.
6. Press the
7. To exit this menu and return to radio operation mode
press the
16/9
HX851
/ key to select "Radio Setup"
key, then select "Display
key, and select "Radio Radio", "Position
Radio Radio
Radio
Compass" other than "Waypoint
Compass Compass
Compass
key.
/ key to select "Waypoint
key, then select "Distance Unit
key.
/ key to select desired unit. Avail-
key to store the selected setting.
key or press the
key until "Setup
Setup Setup Setup
Setup
Radio Setup" Radio Setup"
Radio Setup". Radio Setup"
Display" with the
Display Display
Display
Position Position
Position Position",
Waypoint Waypoint", Waypoint
Waypoint
key until "Setup
Setup Setup Setup
Setup
Waypoint Waypoint
Waypoint Waypoint
Distance Unit" with the
Distance Unit Distance Unit Distance Unit
key several times.
Page 85