Gps Setup; Unit Power; Power Save Mode - Standard Horizon HX851 Owner's Manual

10 GPS SETUP

The HX851's "GPS Setup" mode allows a number of the HX851 internal GPS
unit's parameters to be custom-configured for your operating requirements.

10.1 UNIT POWER

This selection allows the internal GPS unit to be turned on or off to conserve
battery power. The default setting is "On".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Unit Power" in the "GPS Setup" menu with the
[ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "On" or "Off".
6. Press the [ CALL ( ENT ) MENU ] key to store the
selected level.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ( WX )] key sev-
eral times.

10.2 POWER SAVE MODE

This selection selects the Battery Save Mode for the internal GPS unit. The
default setting for the Power Save Mode is "Level 1".
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Power Save Mode" in the "GPS Setup" menu with
the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select the desired level.
GPS Signals are always being received.
Off:
Level 1: Activates the GPS receiver for 0.4 sec-
onds every 5 seconds.
Level 2: Activates the GPS receiver for 50 sec-
onds every 1 minute.
Level 3: Activates the GPS receiver for 50 seconds ev-
ery 3 minutes.
Level 4: Activates the GPS receiver for 50 seconds every 5 minutes.
6. Press the [ CALL ( ENT ) MENU ] key to store the selected level.
Page 74 HX851