Usa, Canada, And International Channels; Simplex/Duplex Channel Use - Standard Horizon HX851 Owner's Manual

When the "GPS Status" mode is selected in step "4" above, the display
will show the "GPS Status" page until a key is pressed.
You may customize the various functions of the HX851 internal GPS unit for
your operating requirements via the "GPS Setup" menu. Refer to section
"10 GPS SETUP" for details.
"R " M
6.6 USA, CANADIAN, AND INTERNATIONAL CHANNELS
1. To change from US to Canadian or International Marine Channels, hold
down the [ 16/9 ] key and press the [ CLR ( WX )] key. The band will change
from USA, to International, and to Canadian with each press.
2. " " appears on the LCD for the USA band, "
Canadian band, and "
3. Refer to the marine channel charts in section "14 CHANNEL ASSIGN-
MENTS" for allocated channels.
"USA" B

6.7 SIMPLEX/DUPLEX CHANNEL USE

Refer to the VHF MARINE CHANNEL CHART (page 89) for instructions on
use of simplex and duplex channels.
All channels are factory-programmed in accordance with FCC (USA),
Industry Canada and International regulations. The mode of operation
cannot be altered from simplex to duplex or vice-versa. Simplex (ship to
ship) or duplex (marine operator) mode is automatically activated, de-
pending on the channel and whether the USA, International or Cana-
dian operating band is selected.
HX851
NOTE
"P " M
"W " M
" appears for the International band.
"C
NOTE
"N " M
"GPS S " M
" B "I
"C " M
" appears for the
" B
Page 27