Scan/Print - imagistics DL850 Operating Manual

Positioning originals in Mixed original mode
Mixed size originals can be copied together from the EDH.
To use the Mixed original mode, see procedure on p. 8-6 to p. 8-7.
1.
Arrange originals in order.
Arrange the mixed size originals as illustrated below.
• Before placing originals in the tray, be sure the EDH is closed fully. Once
closed, do not open the EDH, otherwise the selected copy conditions
may be altered automatically.
• Be sure not to use unsuitable EDH originals. See p. 11-8 for details.
See p. 11-9 for available combinations of mixed originals.
2.
Position mixed originals FACE UP, aligned with the left rear side of
the EDH tray.
Place two-sided originals with page one FACE UP.
Up to 100 originals can be set at a time.
3.
Adjust paper guides.
Positioning Originals (continued)
HINT
To the
To the left
depth
Setting
direction
Reminder!
HINT
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop

Scan/Print

Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-3