Surveillance Motion Control – Pair Connection Mode
Using pair connection along with fiber optical patch cord, the ICS-210x extend RS-232/RS-485 interfaces distance from
surveillance and scanner to the control keyboard/joystick which is installed in the remote monitor center.
1.5 Product Features
Serial Interface
One RS-232 and the other RS-422/485 port to one 10/100Base-TX or 100Base-FX Media Converter
Cost effective solution for RS-232/RS-422/RS-485 to Ethernet application
Supports RS-232 with DB9 interface, 4-wire RS-422 or 2-wire RS-485 with 4-Pin terminal block operation
Asynchronous serial data rates up to 921600bps
Ethernet Interface
Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX standard
Supports auto MDI/MDI-X function on RJ-45 Port for ICS-2100
Supports 100Base-FX Multi-mode SC connector up to 2km for ICS-2102
Supports 100Base-FX Single-mode SC connector up to 15km for ICS-2102S15
Supports 100Base-FX Multi-mode / Single-mode LC connector, distance from 2km up to 120km for ICS-2105A
Smart Functions
Standard TCP/IP interface and versatile operation modes
Software Protocol Support ARP, ICMP,TCP/IP, UDP, HTTP server, DHCP client, Telnet server/client
Built-in IP-Base Web interface for remote management
Serial Operation mode selected via Web management
Pair Connection mode for connecting two serial devices over a network
PLANET Smart Discovery utility automatically finds client devices on the network
Firmware upgrade via HTTP protocol
Figure 1-4 Industrial Serial Converter for Distance Extend Application
-8-
User's Manual of ICS-210x