Planet ICS-2100 User Manual page 51

Example: Two ICS-210x with Pair Connection mode
One be configured as
The other one be configured as
Via the RS-485 interface, the external scanners, speed dome cameras and PTZ receivers can be controlled by the control
keyboard which provides upward, downward, leftward, rightward, clockwise and countercloc
case, we use two ICS-210x to extend the distance between an IP surveillance PT Camera and a Control keyboard. Both of the
two equipments are implemented with RS-485 interface.
The two of the ICS-210x master and slave with below settings:
ICS-210x Master
Connect to
IP Address / Subnet Mask
Operation Mode
Serial Port Configu
ICS-210x Slave
Connect to
I P Address / Subnet Mask
Operation Mode
Serial Port Configuration
Topology:
Pair Connection – Local
Control Keyboard
192.168.0.100 / 255.255.255.0
Mode: Pair Connection – Local
TCP Port Number : 1024
Serial Mode:
Baudrare:
Character Bits:
ration
Parity Type :
Stop Bit :
Hardware Flow Control:
Sp eed Dome Camera, PTZ o
19 .168.0.101 / 255.255.255.0 2
Mode:
Re mote Host IP Address :
Remote Host Port Number :
Serial Mode:
Baudrare:
Character Bits:
Parity Type :
Stop Bit :
Hardware Flow Control:
Figure 4-50 Two ICS-210x configured with Pair-Connection
(Master)
Pair Connection – Remote
RS-485
9600
8
none
1
none
r Scanner
Pair Connection – Remote
192 .168.0.100
1024
RS-485
9600
8
none
1
none
-51-
User's Manual of ICS-210x
(Slave)
kwise with the joystick. In this