Telnet Server Mode - Planet ICS-2100 User Manual

10. After the Virtual COM connection is established, open the VCOM utility again to check the COM9 information.
11. Then can use the console like connect the serial cable with the switch.
4.4.

5 Telnet Server Mode

T ELNET (TELecommunication NETwork) is a network protocol used on the Internet or local area network (LAN) connections.
T he Telnet protocol type is the correct setting for most servers and serial devices, such as Managed Ethernet switches or
G ateways. In most of the case, the telnet use TCP port 23 as communication port.
T he parameter defines the maintenance status for Telnet server
Figure 4-36 Example: VCOM Utility, COM9 information
Figure 4-37 Example: Hyper Terminal COM port scree
-44-
n
.
User's Manual of ICS-210x