Planet ICS-2100 User Manual page 32

Example: Use Microsoft Windows Hyper Terminal, TCP/IP Winsock mode
HyperTerminal is a program that you can use to connect to other computers, Telnet sites, online services, and host
computers, using your modem, a null modem cable, a Console cable or Ethernet connection.
The users want to use the TCP Server mode to connect to an Ethernet Switch via Hyper Terminal, Winsock mode
1. Setup Operation Mode and Serial Port of ICS-210x
2.
Hyper Terminal set up a new connection with the TCP/IP Winsock
Setup Operation Mode and Serial Port of ICS-210x
1. From the WEB interface, set the Serial operation mode of ICS-210x to "TCP Server" and set the TCP Port Number to
"23".
2. Set the Serial Port Configuration of ICS-210x as below:
Mode:
Baudrare:
Character Bits:
Parity Type :
Stop Bit :
Hardware Flow Control:
Figure 4-15 Example: TCP Server Configuration screen
RS-232
9600
8
none
1
none
-32-
User's Manual of ICS-210x