User's Manual of ICS-210x
4.4.3 UDP Client Mode
When the ICS-210x be configured to UD
P Client mode, it allows Serial device that connected to serial port of ICS-210x to
quickly transmit data to multiple Remo
te Hosts over Intranet or Internet network by unicast or multicast. It also makes the
Serial device to receive data from more than one Remote Hosts.
.
The parameter defines the maintenance status for listen for the UDP connection
In UDP Client mode, you need to define the
remote IP Address and Local listen port number.
Figure 4-24 UDP Client mode
The screen in Figure 4-25 appears. When the changed operation mode, the user should be changed the Serial Port
C
onfiguration.
Figure 4-25 UDP Client Configuration screen
-37-