When the changed operation mode, the user should be changed the Serial Port Configuration. The screen in Figure 4-39
appears.
The page includes the following fields:
TCP Port Number
Inactive Timeout
The ICS-210x's "telnet server mode"--if the user used the MS-DOS telnet command it will
show double character. So
Example 1: Telnet Command in Windows Platform
Figure 4-38 COM port screen
Figure 4-39 Telnet Server Configuration screen
The TCP port that ICS-210x uses to listen the connections and that other device
must use to contact ICS-210x. To avoid conflicts with well known TCP ports, the
default is set to "1024".
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter "0".
the user can use other Telnet software like: "putty" or "NetTerm".
-45-
User's Manual of ICS-210x