Planet ICS-2100 User Manual page 39

The page includes the following fields:
 TCP Port Number
 Inactive Timeout
Example: Use PLANET VCOM U
mode
The user want to use the virtual COM like to use the serial cable connect the switch.
1. Setup Operation Mode and Serial Port of ICS-210x
2. Use PLANET VCOM Utility to create
3. Hyper Terminal set up a new connection with the virtual COM port
Setup Operation Mode
1. From the WEB interface, set the S
"1024".
The TCP port that ICS-210x uses to listen the connections and that other device
must use to contact ICS-210x. To avoid conflicts with well known TCP ports, the
default is set to "1024".
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter "0".
tility + Microsoft Wind
Figure 4-28 Virtual COM mode
virtual COM Port
and Serial Port of ICS-210x
erial operation mode of ICS-210x to "
Figure 4-29 Example: Virtual COM Configuration screen
ows Hyper terminal COM Port
Virtual COM" and set the Telnet Port Number to
-39-
User's Manual of ICS-210x