Planet ICS-2100 User Manual page 46

Setup Operation Mode and Serial Port of ICS-210x
1. Set the ICS-210x mode to "Telnet server mode" from web interface.
2. Set the Serial Port Configuration of ICS-210x as below:
Mode:
Baudrare:
Character Bits:
Parity Type :
Stop Bit :
Hardware Flow Control:
Execute "Telnet" command from Windows Start Menu
3. Click the Start Menu and go to Ru
4. Type "telnet" without the quotes and
5. The Telnet window appears, type "open xxx,xxx,xxx,xxx", xxx is the
case we type "open 192.168.0.100" and press enter.
Figure 4-40 Example Telnet Server
RS-232
9600
8
none
1
none
n
hit enter.
Figure 4-41 Example Windows Excuse - Telnet
-46-
User's Manual of ICS-210x
IP address of the ICS-210x Telnet Server. In this