Planet ICS-2100 User Manual page 7

User's Manual of ICS-210x
Process Control
To monitor, configure and manage the Robot conveyer including other machines in a manufacturing, PLC (Programmable
Logical Control) is required. The PLC is used to drive above the manufacturing machines process. The ICS-210x can be set
to TCP Server mode and connect the PLC. The administrator can configure and set command settings through Fast Ethernet
intranet to control the PLC, the administrator and workstation. There is no need to be always sets by the side of the I/O
machine.
Figure 1-2 Industrial Serial Converter for Factory PLC Application
RTU Data Collect – UDP Mode
Connect with RTU (Remote Terminal Unit) to collect and monitor the data of waves, signal and power utilization. ICS-210x
can be used to set-up UDP mode and send data over Fast Ethernet to Local server or over internet to remote server
automatically.
Figure 1-3 Industrial Serial Converter for Factory RTU Application
-7-