Remove Din-Rail Mounting - Planet ICS-2100 User Manual

Step 2: Check the DIN-Rail is tightly on the track. Figure 2-10 shows that install Industrial Equipment finish in DIN-Rail mount.

2.2.2 Remove DIN-Rail Mounting

Step 1: Please refer to following procedures to remove the Industrial Equipment from the track. Figure 2-11 shows how to
remove Industrial Equipment in DIN-Rail mount.
Step 2: Lightly press the button of DIN-Rail for remove it from the track.
Figure 2-10 Industrial Equipment installed in DIN-Rail mount.
Figure 2-11 Remove Industrial Equipment in DIN-Rail mount.
-16-
User's Manual of ICS-210x