Password Setting; Fault Relay Alarm - Planet ICS-2100 User Manual

4.2.2 Password Setting

This function provides administrator to secure Web login. The screen in Figure 4-3 appears.
The page includes the following configurable data:
Login Name
New Password
Confirm Password
After change the default password, if you forget the password. Please press and release the "Reset"
button in the front panel of ICS-210x, the current setting will be lost and the ICS-210x will restore to the
default mode.

4.2.3 Fault Relay Alarm

The Fault Relay Alarm function provides the Power Failure detection. With both power input 1 and power input 2 installed and
the check boxes of Power 1 / Power 2 ticked, the FAULT LED indicator will then be possible to light up when any one of the
power failures occurs. Please refer to the segment of 'Wiring the Fault Alarm Contact' for the failure detection.
Figure 4-3 Password Setting screen
Displays the user name.
Specifies the new password. The password is not displayed. As it entered an ""
corresponding to each character is displayed in the field.
(The maximum length is 15 characters)
This confirms the new password. The password entered into this field must be
exactly the same as the password entered in the Password field.
Figure 4-4 Fault Relay Alarm screen
-25-
User's Manual of ICS-210x