1. This utility show all necessary information from the devices, such as MAC Address, Device Na
IP Subnet address, also can assign new password, IP Subnet address and description
2. After setup completed, press "Update Device", "Update Multi" or "Update All" button to take affect. The meaning of the
3 buttons above are shown as below:
Update Device: use current setting on one single device.
use current setting on choose multi-devices.
Update Multi:
Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be finding in "Op
3. To click the "Control Packet Force Broadcast" function
under different IP subnet address.
6. Press "Connect to Device" button then the Web login screen appears.
7. Press "Exit" button to shutdown the planet Smart Discovery Utility.
A.2 Device's RJ-232/RS-422/RS-485 Pin Assignments
DB9 Pin Define for RS-232
Terminal B ck Define for RS-422/485
lo
DB9-PIN
RS-232
1
DCD
2
RXD
3
TXD
4
5
GND
6
7
8
9
RI
Terminal Block Pin
4-wire for RS-422
RX+
RX-
TX+
TX-
tion" tools bar.
, it can allow assign new setting value to the Web Smart Switch
2-wire for RS-485
RX+
Data A(+)
RX-
Data B(-)
TX+
TX-
-66-
User's Manual of ICS-210x
me, firmware version, Device
for the devices.