ICS-210x – Slave: be configured to Pair-Connection-Remote
5.
From Web interface, login the ICS-210x with IP address = 192.168.0.101, set up the operation mode of this unit to be
" Pair Connection-Local (Slave)"
6.
Set the Serial Port mode of ICS-210x-Slave to RS-485.
7.
Then the control keyboard cans remote control the IP camera.
Figure 4-53 Pair Connection –Remote, operation mode configuration
Figure 4-54 Pair Connection – Local, serial port configuration
-53-
User's Manual of ICS-210x