Planet ICS-2100 User Manual page 57

The page includes the following fields:
SMTP Setup
 Enable SMTP
 SMTP Port
 SMTP Server Address
 SMTP Login Information
 Mail to
 Mail from
Log-Fail Warning
 Subject
 Message Body
OP Change Warning
 Subject
 Message Body
Reboot Warning
 Subject
 Message Body
Logout
■
Press this function; the web interface will go back to login screen. The screens in Figure 4-57 and Figure 4-58 appear.
To Enable SMTP function. The default value is "Disable".
Set port number of SMTP service. The default number is "25".
Type the SMTP server name or the IP address of the SMTP server address
If authentication is required when an e-mail is sent
Enable
Enter your login name for the SMTP Server.
Username
Enter your password for the SMTP Server.
Password
Enter the receiver's e-mail address.
Enter the sender's e-mail address. This address is used for reply e-mails.
Enter the subject/title of the e-mail.
The default subject is
"[ICS-210x]Login Fail Warming".
Enter the message of the e-mail.
The default subject is
"ICS-210x web Login Fail.".
Enter the subject/title of the e-mail.
The default subject is
"[ICS-210x]Operation Mode Change Warming".
Enter the message of the e-mail.
The default subject is
"ICS-210x Operation Mode Change.".
Enter the subject/title of the e-mail.
The default subject is
"[ICS-210x]Device Reboot Warming".
Enter the message of the e-mail.
The default subject is
"ICS-210x Device Reboot.".
Figure 4-57 Logout dialogues screen
-57-
User's Manual of ICS-210x
.