Product Features - Planet FT-902S15 User Manual

1.4 Product Features

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3u 100Base-FX standard
One-channel media conversion between 10/100Base-TX and 100Base-FX
TP port supports 10/100Base-TX auto-negotiation and auto-MDI/MDI-X
100Base-FX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 2km on FT-902
100Base-FX: 9/125μm single-mode cable provides long distance for 15km on FT-902S15
100Base-FX: 9/125μm single-mode cable provides long distance for 35km on FT-902S35
100Base-FX: 9/125μm single-mode cable provides long distance for 50km on FT-902S50
100Base-FX WDM interface for up to 20km (single-mode fiber 9μm/125μm) on FT-906A20/FT-906B20
10/100Base-TX: 2-pair Cat. 3/4/5 UTP cable, up to 100 meters
Compacts size for working with PLANET MC family Media Chassis ( MC-700/MC-1500/MC-1500R)
Wall-mountable hardware designed
Built-in IP-Base Web interface for remote management
Layer 2 Management Feature
Store-and-Forward mechanism
Built-in Web operation interface for remote management and setup
Manual IP address setting / DHCP client for IP address assignment
SNMP v1 / v2c monitor / private Enterprise MIB
Event trap and SNMP trap support
Speed duplex mode configuration / Flow Control setting / bandwidth Control on TP / Fiber port
Supports Port Status / Ethernet Statistics on both TP and Fiber interface
Supports Maximum frame size to 16K bytes
Loop detection / Broadcast / Multicast / Unicast storm control
Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
802.1p Tag Priority / IP address priority / IP DSCP option in Quality of Service Mode and Strict Priority /
Weighted Round Robin (WRR) QoS policies
TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
16 TCP / UDP Filter groups
Password setting, IP setting and devices description setting through Planet Smart discovery utility
Firmware upgrade via remote Web interface
External DC5V 2A power supply
Compact in size, easy installation
LED indicators for easy network diagnosing
Reset Button at the front panel for resetting the factory default
Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /100Base-FX SFP module
-1-