Planet ICS-2100 User Manual page 35

Value
Host address
port
10. Then can use the console like connect the serial cable with the switch.
Figure 4-20 Example: Hyper Terminal configuration
Description
The address or name of the connection you want to create. This can be in standard Internet
dotted notation (for example, w.x.y.z) or can be the site's user-friendly name.
The number of the port that you want the connection to use. Port 23 is the default.
Figure 4-21 TCP/IP Winsock connection screen
-35-
User's Manual of ICS-210x