Table of Contents
Advertisement
3.3 Chassis Installation And Rack Mounting
To install the media converter in a 10-inch or 19-inch with
standard rack, follow the steps described below.
Step 1:
Find an available slot
from your PLANET MC
Chassis.
Step 2:
Follow Figure 3-2,
carefully slide in the
converter fully and
firmly fitted to the
slot of the chassis.
The Power LED of the
converter will turns ON.
1. Never push the converter into the slot with
2. The Media Converter Chassis supports hot-
Note
3.4 Din-Rail Installation
The GT-1205A also supports din-rail installation, the option kit
RKE-DIN can help to mount the converter to the Rail system,
please follow the steps below.
Step 1:
Use the bundled screw to fix the RKE-DIN to the
converter.
Step 2:
Hook the converter to the DIN-Rail.
You must use the screws supplied with the
RKE-DIN. Damage caused to the parts by using
incorrect screws would invalidate your warranty.
Note
violent, it could damage the chassis.
swap, there is no need to turn off the whole
chassis before slide in the new converter.
Figure 3-2: Insert GT-1205A
Media Converter into an
available slot
11
Advertisement
Table of Contents
