Mounting Installation; Din-Rail Mounting - Planet IXT-705AT User Manual

3.2 Mounting Installation

This section describes how to install the Industrial Media Converter and
makes connections to it. Please read the following topics and perform
the procedures in the order being presented.
In the
IGS-801 (PLANET 8-port Industrial Gigabit Switch) as
the example. However, the steps for PLANET Industrial
Note
Switch and Industrial Media Converter are similar.

3.2.1 DIN-rail Mounting

The DIN rail is screwed on the Industrial Media Converter when is out
of factory. When replacing the wall-mount application with DIN-rail
application on Industrial Media Converter, please refer to the following
figures to screw the DIN rail on the Industrial Media Converter. To hang
the Industrial Media Converter, follow the following steps:
Step 1: Screw the DIN rail on the Industrial Media Converter.
Step 2: Lightly insert the DIN rail into the track.
installation steps below, this Manual uses
13