Cleanup - MK Diamond Products MK-370 EXP Owner's Manual & Operating Instructions

CLEANUP

NOTES: Dispose of wastewater in accordance with applicable Federal, State and Local laws.
Suction
Screen
(A)
Remove the pump Suction
Screen and clean the Water
Pump of all debris
CAUTION
Ensure the saw is disconnected before completing the remainder of the cleanup process.
(D)
Ensure the ON/OFF Switch is
in the OFF position
(G)
Remove the Cutting Assembly
from the Water Pan
SETUP, ADJUSTMENT & OPERATION
(B)
Fill the Water Pan with clean
water
(E)
Unplug the GFCI from the
Power source
(H)
Dispose the contents of the
Water Pan
2
(C)
Run the MK-370 EXP until
clear water is seen at the
blade Cooling Flow Points
(Approx. 1 minute)retaining
thumbscrew
GFCI
(F)
Unplug MK-370 EXP from the
GFCI
(I)
Clean the MK-370 with soap
and clean water