Cleanup - MK Diamond Products MK-2000 Series Owner's Manual

MK-2000 ELECTRIC SAW

CLEANUP

PUMP CLEANUP
(A) (B)
Clean the Water Pump suction Place the Water Pump in an ex-
of all debris. ternal container. Run the MK-2000
until clear water is seen at the Blade
cooling ports (Approx. 1 minute).
CAUTION
Ensure the saw is disconnected before completing the remainder of the
cleanup process.
Ensure water is not forced into the motor casing when cleaning.
CUTTING TABLE CLEANUP
(A) (B)
Clean the Movable Cutting Table Clean the Movable Cutting Table
Guide Rails. Roller Wheels. Clean the remainder
of the MK-2000.
28