MK-2000 ELECTRIC SAW
CLEANUP
PUMP CLEANUP
(A)
(B)
Clean the Water Pump suction
Place the Water Pump in an ex-
of all debris.
ternal container. Run the MK-2000
until clear water is seen at the Blade
cooling ports (Approx. 1 minute).
Ensure the saw is disconnected before completing the remainder of the
CAUTION
cleanup process.
Ensure water is not forced into the motor casing when cleaning.
CUTTING TABLE CLEANUP
(A)
(B)
Clean the Movable Cutting Table
Clean the Movable Cutting Table
Guide Rails.
Roller Wheels. Clean the remainder
of the MK-2000.
26