Cleanup - MK Diamond Products MK-5005S Owner's Manual & Operating Instructions

MK-5000

Cleanup

(A)
Clean the Water Pump
suction of all debris.
(D)
Ensure the ON/OFF Switch
is in the OFF position.
(G)
Clean the Water Basin.
(B)
Place the Water Pump in an
external container.
(E)
Unplug MK-5000 from the
power source.
(H)
Clean the movable Cutting
Table Guide Rails.
28
CLEANUP
(C)
Run the saw until clear water is
seen at the blade cooling ports
(Approx. one (1) minute).
(F)
Clean the saw with soap and
clean water.
(I)
Clean the movable
Cutting Table Roller Wheels.