MAINTENANCE AND TROUBLESHOOTING
3. Cooling Flow:
(A)
Check cooling flow Adjusting
Clamp open
(D)
Remove the Cooling Transfer
Tube and check flow
Remove the Blade Guard
Remove the Cooling Transfer
Tube from the Blade Guard
Remove the Pump Discharge
Fitting and check
(I)
Intake Fitting
(B)
inlet
((E)
Clean the Blade Guard Intake
Fitting
8
(C)
Place Pump into a bucket of
water and check flow
Intake Screen
(F)
Remove the Pump Intake
Screen and check for debris
(J)