Table of Contents
Advertisement
CRACK CHASER SAW
Cleanup
CAUTION
NOTE:
(A)
Verify the engine is off and cool be-
fore beginning to clean. Clean the
saw with soap and water.
MAINTENANCE SAFETY
•
Always turn the master engine switch to the off position.
•
NEVER lubricate components or attempt service on a running machine.
•
Keep the machinery in proper running condition.
•
Fix damage to the machine immediately and always replace broken parts, or missing decals.
New Maintenance
Perform the following after initial purchase and operation of the saw.
(A)
Change engine oil after
first month or first 20 operating
hours (See Engine Manual).
Engine parts are extremely hot following use, allow engine to cool 1/2-hour before
cleaning. Use care during cleanup to avoid injury.
1. To extend operating life, the Concrete Saw should be cleaned following every
use.
2. Using a garden hose or pressure washer is not advised as it can force water
into the air cleaner or muffler opening.
3. Use care when cleaning around electrical components.
Check and adjust tension on
48 hours of operation
(B)
belts following first
(See Belt section).
22
CLEANUP
Advertisement
Table of Contents
