Tile Saw Specific Warnings; Safety Label Locations - MK Diamond Products MK-370 EXP Owner's Manual & Operating Instructions

SAFETY

SAFETY LABEL LOCATIONS

Safety labels are located according to Figures 1 through 4 below. The labels contain important safety
information. Please read the information contained on each safety label. These labels are considered a
permanent part of your saw. If a label comes off or becomes hard to read, contact MK Diamond or your dealer
for a replacement
Item Location
1A Motor – Right Side
1B Motor – Right Side
2 Motor – Left Side
3A Cutting Head – Top
3B Cutting Head – Top
4A Pump – Left Side
4B Pump – Right Side
A
A

TILE SAW SPECIFIC WARNINGS:

WARNING
Wear eye protection.
Use splash hood for every operation for which it can be used.
Disconnect saw before servicing, when changing cutting blades, and cleaning.
Replace damaged cutting blade before operating.
Caution – Receptacle is for Water Pump Only
Motor Specifications
Caution – Use with Ground Fault Circuit Interrupter
MK-370 EXP Serial Number
Warning – Read Owners Manual
Warning – Connect to Grounded Receptacle
Pump Specifications
B
1
B
3
Description
A
10
Part No.
154822
N/A
155678
157500
155806
N/A
N/A
2
B
4