Adjustment & Operation - MK Diamond Products MK-370 EXP Owner's Manual & Operating Instructions

SETUP, ADJUSTMENT & OPERATION
ADJUSTMENT & OPERATION
1. Cutting Straight Edges:
CAUTION
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for which it was
designed.
(A)
Loosen the Adjustable Cutting
Guide retaining thumbscrew
Ruler/Stop
(D)
Place the tile against the
Ruler/Stop and Cutting Guide
Position the Adjustable
Cutting Guide to desired cut
Turn the motor ON
(G)
Perform the cut
Desired cut length
indicated here
(B)
length
(E)
(H)
Turn the motor OFF when
work is complete
20
(C)
Tighten the retaining
thumbscrew
(F)
Verify cooling flow on both
sides of the blade