Troubleshooting - MK Diamond Products MK-370 EXP Owner's Manual & Operating Instructions

MAINTENANCE AND TROUBLESHOOTING

TROUBLESHOOTING

1. Blade will not cut properly:
If "Glazed" then If Blade Core is bent, or Arbor is out
Dress Blade of round, change blade
(A) (B) (C)
Check for Smoothness or Check for proper rotation Ensure the Blade Core is not
"Glazing" (Dress blade if
bent and Arbor is not out of
needed)
round
(D) (E)
Verify the blade is correct for Return to MK Diamond
the material being used for Repair
2. Movable Cutting Table Does Not Move Correctly:
(A) (B)
(C)
Check that the Guide Bar is Check the Movable Cutting Return to MK Diamond
clean – clean if dirty Table Roller Wheel for wear for Repair
replace if necessary