MK Diamond Products MK-370 EXP Owner's Manual & Operating Instructions page 15

UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
Turn Counter-
Motor Shaft
Inner blade
ClockWise
Guard
Motor
Blade Wrench
Shaft Wrench
(D) (E) (F)
Place the Shaft Wrench Using the Blade and Shaft Install Diamond Blade
between the Inner Blade
Wrenches, loosen and remove onto Blade Shaft
Guard and the Motor and onto
the Retaining Nut and Outer
the Motor Shaft Flange
Rotate CCW to
close
(G) (H) (I)
Install the Retaining Nut and Close the Blade Guard Verify the Blade is seated on
Outer Flange and then tighten the Blade Shaft and direction
using the Blade and Shaft of rotation is correct
Wrenches
(J) (K)
Tighten the Blade Guard Tighten the Blade Guard,
Retaining, Wing nut Retaining Knob
1