MK-370EXP SAW
CLEANUP
Dispose of wastewater in accordance with applicable Federal, State and Local laws.
NOTE:
(A)
Remove the pump Suction
Screen and clean the Water
Pump of all debris.
(See pump manual for more
detail)
CAUTION
(D)
Ensure the ON/OFF Switch
is in the OFF position.
Unplug the saw from the
Power source
(G)
Clean the MK-370EXP with
soap and clean water
Fill the Water Pan with
Ensure the saw is disconnected before completing the remainder of the cleanup
process.
Assembly from the Water
Clean the Water Pan
(B)
clean water
(E)
Remove the Cutting
Pan
(H)
34
CLEANUP
(C)
Run the MK-370EXP Saw
until clear water is seen at
the blade Cooling Flow Points
(Approx. 1 minute)
(F)
Dispose the contents of the
Water Pan
(I)
Clean the Adjustable Cutting
Guide and Guide Bar