MK Diamond Products MK-370 EXP Owner's Manual & Operating Instructions page 21

2. Cutting 45° Miters:
The MK-370 EXP is designed with an adjustable Cutting Head for precision 45º Miter Cuts.
CAUTION
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for which it was
designed.
(A)
Loosen the Cutting Head
Pivot, Retaining Knob
(D)
Loosen the Adjustable Cutting
Guide retaining thumbscrew
(G)
Place the tile against the
Ruler/Stop and Cutting Guide
SETUP, ADJUSTMENT & OPERATION
Pivot Direction
(B)
Pivot the Cutting Head to the
45º cutting position
(E)
Position the Adjustable
Cutting Guide to
desired cut length
(H)
Turn the motor ON
21
(C)
Tighten the Cutting Head,
Pivot Retaining Knob
(F)
Tighten the retaining
thumbscrew
(I)
Verify cooling flow on both
sides of the blade