FOR RESTRICTED USE only
Telnet Command Line Interface
Initiating a Telnet Session
This procedure shows how to initiate a Telnet session from a PC in order to access the
Telnet services provided by the Printer.
Description
Initiating a
Follow these instructions to issue Telnet commands.
Telnet
1. Identify the IP address of your Printer. (Note: See
session
Address.)
2. Initiate a Telnet session from a DOS window on your PC. At the DOS
prompt, enter telnet [IP Address]
•
•
•
3. Enter "help" or "?" to get an on-window list of supported Telnet
commands.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
Example: C:\>telnet 192.168.11.12
All Telnet responses from the Printer will then be displayed in the
Telnet session on the PC.
All commands entered will be sent to the Telnet client in the
Printer.
Fargo Electronics, Inc.
Accessing the IP
7-6